Pioneer DEH-80PRS - Manual (Page 13)

Opening the front panel
1 Press the open button.
Disc loading slot appears.
Playing a CD/CD-R/CD-RW
1 Insert the disc into the disc loading slot with the
label side up.
Ejecting a CD/CD-R/CD-RW
1 Press h (eject).
Playing songs on a USB storage device
1 Use a Pioneer USB cable to connect the USB sto-
rage device to the unit.
! Plug in the USB storage device using the USB
cable.
Stopping playback of files on a USB storage device
! You may disconnect the USB storage device at
any time.
Playing songs on an SD memory card
1 Remove the front panel.
For details, refer to Removing the front panel to
protect your unit from theft on page 8.
2 Insert an SD memory card into the SD card slot.
Insert it with the contact surface facing down,
and press on the card until it clicks and comple-
tely locks into place.
3 Re-attach the front panel.
4 Press SRC/OFF to select SD as the source.
Playback will start.
Stopping playback of files on an SD memory card
1 Remove the front panel.
For details, refer to Removing the front panel to
protect your unit from theft on page 8.
2 Press on the SD memory card until it clicks.
The SD memory card is ejected.
3 Pull out the SD memory card.
4 Re-attach the front panel.
Selecting a folder
1 Press
or .
Selecting a track
1 Turn LEVER.
Fast forwarding or reversing
1 Turn and hold down LEVER to the right or left.
Returning to root folder
1 Press and hold BAND/ .
Switching between compressed audio and CD-DA
1 Press BAND/ .
Switching between playback memory devices
You can switch between playback memory devices on
USB storage devices with more than one Mass Sto-
rage Device-compatible memory device.
1 Press BAND/ .
! You can switch between up to 32 different mem-
ory devices.
Notes
! When playing compressed audio, there is no
sound during fast forward or reverse.
! Disconnect USB storage devices from the unit
when not in use.
! If there are two USB storage devices con-
nected to this unit, the device connected to
the input of the selected source is the one
that is operated.
! Disconnect communications for the USB sto-
rage device before switching to operation of
the other device.
Displaying text information
Selecting the desired text information
1 Press
/ DISP.
Notes
! Depending on the version of iTunes used to
write MP3 files to a disc or media file types, in-
compatible text stored within an audio file
may be displayed incorrectly.
! Text information items that can be changed
depend on the media.
Selecting and playing files/
tracks from the name list
If there are external storage devices (USB, SD)
connected to the unit, this function is only
available when
Music browse is set to OFF.
Refer to Music browse (music browse) on
page 34.
1 Press (list) to switch to the file/track
name list mode.
En
13
Section
02
Operating
this
unit
Operating this unit