Pioneer DEH-80PRS - Manual (Page 12)

When Alternative FREQ is used, the regional func-
tion limits the selection of stations to those broad-
casting regional programs.
1 Press M.C. to turn the regional function on or off.
Local (local seek tuning)
Local seek tuning lets you tune in to only those radio
stations with sufficiently strong signals for good re-
ception.
1 Press M.C. to turn local on.
! To cancel, press M.C. again.
2 Turn LEVER left or right to select the desired set-
ting.
FM:
Level 1
—Level 2—Level 3—Level 4
MW/LW: Level 1 —Level 2
The highest level setting allows reception of only
the strongest stations, while lower levels allow the
reception of weaker stations.
PTY search (program type selection)
You can tune in to a station using PTY (program type)
information.
1 Turn LEVER left or right to select the desired set-
ting.
News&Inf
—Popular—Classics—Others
2 Press M.C. to begin the search.
The unit searches for a station broadcasting that
type of program. When a station is found, its pro-
gram service name is displayed.
PTY (program type ID code) information is listed
in the following section. Refer to PTY list on page
10.
To cancel the search, press
M.C. again.
The program of some stations may differ from
that indicated by the transmitted PTY.
If no station is broadcasting the type of program
you searched for,
Not found is displayed for
about two seconds and then the tuner returns to
the original station.
Traffic Announce (traffic announcement standby)
1 Press M.C. to turn traffic announcement standby
on or off.
Alternative FREQ (alternative frequencies search)
When the tuner cannot get a good reception, the unit
automatically searches for a different station in the
same network.
1 Press M.C. to turn the alternative frequencies
search on or off.
News interrupt (news program interruption)
1 Press M.C. to turn the NEWS function on or off.
Tuning Mode (LEVER tuning setting)
You can assign a function to the LEVER on the unit.
Select Manual (manual tuning) to tune up or down
manually or select Preset (preset channel) to switch
between preset channels.
1 Press M.C. to select Manual or Preset.
CD/CD-R/CD-RW and external
storage devices (USB, SD)
Basic operations
7 5 6 8 4
3 2 1
1 Bit rate/sampling frequency indicator
Shows the bit rate or sampling frequency of
the current track (file) when the compressed
audio is playing.
! When playing back VBR (variable bit
rate)-recorded AAC files, the average bit
rate value is displayed. However, de-
pending on the software used to decode
AAC files,
VBR may be displayed.
2 Folder number indicator
Shows the folder number currently playing
when the compressed audio is playing.
3 Track number indicator
4 PLAY/PAUSE indicator
5 S.Rtrv indicator
Appears when Sound Retriever function is on.
6 Song time (progress bar)
7 Play time indicator
8 Voltage indicator
Shows the battery voltage.
! The level displayed on the voltage indi-
cator may differ from the actual voltage
level.
En
12
Section
02 Operating this unit