beautypg.com

02 operating this unit, Way network mode, Standard mode – Pioneer DEH-80PRS User Manual

Page 18: Extra functions

background image

Operation mode marks

This manual uses the following marks to make
the description clear.

: This mark indicates a function only in

3-way network mode or an operation in 3-way
network mode.

: This mark indicates a function available

only in standard mode or an operation in stan-
dard mode.
! The functions and operations which do not

carry either mark are commonly used in
the 3-way network mode and standard
mode.

3-way network mode

Adjusting the audio easily

By carrying out the following settings/adjust-
ments in the order shown, you can effortlessly
create a finely-tuned sound field.

1 Using the position selector (POSI)
2 Auto TA and EQ (auto-time alignment and auto-

equalizing)

3 Using balance adjustment (BAL)
4 Recalling equalizer curves

Adjusting the audio finely

By carrying out the following settings/adjust-
ments in the order shown, you can effortlessly
create a finely-tuned sound field.

1 Adjusting time alignment (TA1, TA2)
2 Adjusting network (NW 1, NW 2, NW 3,

NW 4)

3 Adjusting equalizer curves (EQ 1)
4 Adjusting the 16-band graphic equalizer (EQ 2)

Standard mode

Adjusting the audio easily

The following functions let you easily adjust
your audio system to match the car interior
acoustic characteristics, which vary depend-
ing on the type of car.

1 Using the position selector (POSI)

2 Auto TA and EQ (auto-time alignment and auto-

equalizing)

3 Using fader/balance adjustment (F/B)
4 Recalling equalizer curves

Adjusting the audio finely

By carrying out the following settings/adjust-
ments in the order shown, you can effortlessly
create a finely-tuned sound field.

1 Using time alignment (TA1, TA2)
2 Using subwoofer output (SW 1)
3 Adjusting subwoofer settings (SW 2)
4 Adjusting low pass filter attenuation slope

(

SW 3)

5 Setting the high pass filter for front speakers

(

F.HPF 1, F.HPF 2)

6 Setting the high pass filter for rear speakers

(

R.HPF 1, R.HPF 2)

7 Adjusting equalizer curves (EQ 1)
8 Adjusting the 16-band graphic equalizer (EQ 2)

Extra functions

These functions are helpful in adjusting the
sound to suit your system or your personal
preferences.
! Adjusting loudness (LOUD)

! Adjusting source levels (SLA)

! Using automatic sound levelizer (ASL)

En

18

Section

02

Operating this unit