Pioneer SC-LX57-S - Manual (Page 38)

38
03
Connecting your equipment
MULTI-ZONE setup using HDMI terminal (HDZONE)
Important
! MAIN/HDZONE at ZONE Setup must be set to HDZONE in order to use the HDZONE function ( page 103 ).
! To use the HDZONE functions, set Control or Control Mode in HDMI Setup to OFF. For details, see HDMI
Setup on page 69 .
% Connect a separate receiver to this receiver’s HDMI OUT 3 terminal.
Connect speakers and a TV to the HDZONE receiver as shown on the illustration below.
OUT 3 (HD ZONE)
SELECTABLE
OUT 3
(HD ZONE)
SELECTABLE
HDMI IN
Sub zone (HDZONE) Main zone
Connecting to the network through LAN interface
By connecting this receiver to the network via the LAN terminal, you can listen to Internet radio stations. To listen
to Internet radio stations, you must sign a contract with an ISP (Internet Service Provider) beforehand.
When connected in this way, you can play audio files stored on the components on the local network, including
your computer.
LAN (10/100) LAN (10/100)
WAN 3 2 1
LAN
Internet
Modem
Router
LAN cable (sold separately)
to LAN port
to LAN port
Computer NAS
Connect the LAN terminal on this receiver to the LAN terminal on your router (with or without the built-in DHCP
server function) with a straight LAN cable (CAT 5 or higher).
Turn on the DHCP server function of your router. In case your router does not have the built-in DHCP server func-
tion, it is necessary to set up the network manually. For details, see
Network Setup menu on page 100 .
LAN terminal specifications
! LAN terminal : Ethernet jack (10BASE-T/100BASE-TX)
Notes
! Refer to the operation manual of the equipment you have as the connected equipment and connection method
may differ depending on your Internet environment.
! When using a broadband Internet connection, a contract with an Internet service provider is required. For
more details, contact your nearest Internet service provider.