Mhl setup making network settings using safari – Pioneer SC-LX57-S User Manual

Page 104

104

The System Setup and Other Setup menus

3 When you’re finished, press RETURN.

You will return to the Other Setup menu.

Note

If another zone is on, it may not be possible to play the audio contents. In this case, turn the other zone off, then
play the audio contents.

Maintenance Mode

Only use this if so instructed by a Pioneer service engineer or custom installer.

MHL Setup

Select whether or not to switch the input automatically to the MHL input when an MHL-compatible device is
connected.
! Default setting: ON

1 Press

on the remote control, then press HOME MENU.

A Graphical User Interface (GUI) screen appears on your TV. Use

i/j/k/l and ENTER to navigate through the

screens and select menu items. Press RETURN to exit the current menu.

! Press HOME MENU at any time to exit the Home Menu.

2 Select ‘System Setup’ from the Home Menu, then press ENTER.
3 Select ‘MHL Setup’ from the System Setup menu.
4 Select the ‘Auto input switching’ setting you want.

Note

This is only valid for MHL-compatible devices supporting this function.

Making network settings using Safari

1 Launch Safari on your computer.
2 Press Bookmark icon. Click Bonjour list (a), and then select this receiver's name
(Friendly Name) (b) in Bookmark.

If Bonjour list is not displayed, access the IP address“http://(the receiver's IP address)” from Safari.

3 Click IP, Proxy Setting.
4 Setup the network settings manually and then press Apply.

Note

This setting for the network has been confirmed for Mac OS X 10.7 and Safari 5.1.

This manual is related to the following products:

SC-LX57-K