Pioneer SC-LX57-S User Manual
Page 31
31
03
Connecting your equipment
Connecting your TV with no HDMI input
This diagram shows connections of a TV (with no HDMI input) and DVD player (or other playback component) to
the receiver.
Important
! With these connections, the picture is not output to the TV even if the DVD player is connected with an HDMI
cable. Connect the receiver and TV using the same type of video cable as used to connect the receiver and
player.
! Also, when the receiver and TV are connected by anything other than an HDMI cable, the OSD function allow-
ing display of the receiver’s settings, operations, etc., on the TV’s screen cannot be used. In this case, watch
the receiver’s front panel display while performing the various operations and making settings.
BD IN
LAN (10/100) DC OUTPUT
for WIRELESS LAN
(OUTPUT 5 V
0.6 A MAX)
COAXIAL
OPTICAL
ASSIGNABLE
ASSIGNABLE
IN
1
(DVD)
IN
2
(SAT/CBL)
IN
3
(DVR/BDR)
IN
4
(VIDEO)
IN
1
(TV)
IN
2
(DVR/BDR)
IN
1
(DVD)
IN
2
(SAT/CBL)
IN
6
IN
7
IN
8
OUT
OUT 2
OUT 1
(CONTROL)
HDMI
OUT 3
(HD ZONE)
ASSIGNABLE
SELECTABLE
ASSIGNABLE
DVD
IN
MONITOR
OUT
COMPONENT VIDEO
PB
Y
PR
1
-
8
IN
1
(DVD)
IN
2
(DVR/
BDR)
MONITOR
OUT
BD IN
LAN
(10/100) DC OUTPUT
for WIRELESS LAN
(OUTPUT 5 V
0.6 A MAX)
COAXIAL
OPTICAL
ASSIGNABLE
ASSIGNABLE
IN
1
(DVD)
IN
2
(SAT/CBL)
IN
3
(DVR/BDR)
IN
4
(VIDEO)
IN
1
(TV)
IN
2
(DVR/BDR)
IN
1
(DVD)
IN
2
(SAT/CBL)
IN
6
IN
7
IN
8
OUT
OUT 2
OUT 1
(CONTROL)
OUT 3
(HD ZONE)
SELECTABLE
HDMI
ASSIGNABLE
1
-
8
ASSIGNABLE
DVD
IN
MONITOR
OUT
COMPONENT VIDEO
P
B
Y
P
R
IN
1
(DVD)
IN
2
(DVR/
BDR)
MONITOR
OUT
VIDEO
VIDEO OUT
VIDEO
VIDEO IN
DIGITAL OUT
COAXIAL
ANALOG
R
L
AUDIO OUT
OPTICAL
Select one
Select one
Select one
HDMI OUT
Y
P
B
P
R
COMPONENT VIDEO OUT
Y
P
B
P
R
COMPONENT VIDEO IN
TV
DVD player, etc.
! In order to listening to HD audio with this receiver, connect an HDMI cable, and use analog video cable for
video signal input.
Depending on the player, it may not be possible to output video signals to both HDMI and other video output
(composite, etc.) simultaneously, and it may be necessary to make video output settings. Please refer to the
operating instructions supplied with your player for more information.
! If you want to listen to the sound of the TV over the receiver, connect the receiver and TV with audio cables
(
page 29
).
! If you use an optical digital audio cable or RCA (analog) audio cable, you’ll need to tell the receiver which digi-
tal input you connected the player to (see
The Input Setup menu
on
page 45
).