beautypg.com

Using front stage surround advance, Listening in stereo, Genre sync mode – Pioneer LX01 User Manual

Page 33: Using the sound retriever, Listening to your system 05

background image

Listening to your system

05

33

En

Ent.Show – Suitable for musical sources

Expanded – Creates an extra wide stereo field

TV Surround – Provides surround sound for both
mono and stereo TV sources

Advanced Game – Suitable for video games

Sports – Suitable for sports programs

Classical – Gives a large concert hall-type sound

Rock/Pop – Creates a live concert sound for rock
and/or pop music

Unplugged – Suitable for acoustic music sources

Ext.Stereo – Gives multichannel sound to a stereo
source, using all of your speakers

Using Front Stage Surround Advance

The Front Stage Surround Advance modes are effective
when you are using the Front surround speaker setup as
described on page 6.

Press to select a Front Stage Surround

Advance mode.
The

F.S.SURR indicator lights.

Press repeatedly to select

Focus 5.1ch, Wide 5.1ch or

Extra Power. You cannot select a mode other than Extra

Power for some audio streams.

1

Focus 5.1ch – Use to provide a rich surround sound
effect directed to the center area where the left and
right speakers sound projection converges.

Wide 5.1ch – Use to provide a surround sound effect
to a wider area than

Focus 5.1ch mode.

Extra Power – Outputs stereo sound (in the case of
multi-channel sources, down-mixed stereo sound)
from the surround speakers for powerful stereo effect.

Listening in stereo

You can listen to any source — stereo or multichannel —
in stereo. When playing a multichannel source, all
channels are downmixed to the front left/right speakers
and the subwoofer.

Press repeatedly until STEREO shows in the

display.

Genre Sync Mode

Only when you have this unit connected to the supplied
HDD/DVD recorder and are using the HDMI Control
function, you can make use of the Genre Sync Mode to
have the listening mode automatically change to that
which best matches the genre of the contents playing

from the recorder.

2

• Set the

HDMI Mode to AMP Mode (page 43).

Press when listening to media contents

from a recorder.
The most appropriate listening mode is selected and
shown in the display. When the related genre could not
be determined,

No Genre or Can’t use may be displayed

and the listening mode remains unchanged.

Tip

• Mainly used with Jukebox and MP3 sources.

• To use this function, you must have an HDMI Control-

compatible Pioneer HDD/DVD recorder connected via
HDMI, and have the HDMI Control function set to On.

Using the Sound Retriever

When audio data is removed during the MP3 or WMA
compression process, sound quality often suffers from
an uneven sound image. The Sound Retriever feature
employs new DSP technology that helps bring CD quality
sound back to compressed two channel audio by
restoring sound pressure and smoothing jagged artifacts
left over after compression.

Tip

• This feature is effective when used together with the

Jukebox function of the HDD/DVD recorder.

Press while listening to a stereo source

3

.

Press repeatedly to switch between:

Retriever On — Switches the Sound Retriever on.

Retriever Off — Switches the Sound Retriever off.

Note

1 You cannot use this function for the following audio streams:

• Dolby TrueHD: over 88.2 kHz
• DTS-HD: over 88.2 kHz or with the channel format of 2/0
• DTS-Express: with the channel format of 2/0

F.S.

SURR

SURR

2 This function is available only for a Pioneer HDMI Control-compatible HDD/DVD recorder.
3 This setting cannot be used with multichannel sources. Also, in case of SACD, DTS-HD, DTS-Express, Dolby TrueHD, Dolby Digital Plus, and

PCM (192 kHz/176.4 kHz), even stereo sources cannot be used.

GENRE

SOUND

RTRV

01SX-SW70SW_EN.book 33 ページ 2008年10月9日 木曜日 午後4時32分