Pioneer VSX-D710S - Manual (Page 31)

31
En
Sound Modes
1
2
ENTER
DISC
DTV INFO MPX/RETURN
DTV ON/OFF DTV MENU
D.ACCESS GUIDE
CLASS
ATT
BAND
1 ¡ 4 ¢
7 8 3 ¶
EFFECT
DVD VCR CD-R TV
RCV TUN TVC CD
MIDNIGHT
MULTI CONTROL
5.1 / 7.1
RECEIVER SOURCE
1 2 3
4 5 6
7 8 9
0
10
1 Press RCV .
This sets the remote to select the sound mode.
(You can skip this step when using the controls on
the receiver.)
2 Press MIDNIGHT.
Each press switches MIDNIGHT listening mode on or
off.
MEMO:
• The effect automatically adjusts according to the
volume level.
MIDNIGHT Listening Mode
When listening at low volume, surround effects tend to
become less than satisfactory. Turn the MIDNIGHT
listening mode on to enjoy the effects of quality
surround sound even at low volumes. This mode allows
you to hear effective surround sound of movies at low
volume levels.
To switch on DVD 7.1 ch (5.1 ch for VSX-
D710S) mode press the
DVD/LD MULTI
CONTROL button on the remote, then RCV ,
then 5.1/7.1 button.
VSX-D710S only: On the main unit press the
DVD 5.1CH button to switch on 5.1 ch mode.
Press the 5.1/7.1 button on the remote to go
back to the DVD/LD mode. If you’re using
the main unit, choose any other function
with the
MULTI JOG .
MEMO:
• When 5.1 ch/7.1 ch input is selected, Dolby mode,
DSP mode, SIGNAL SELECT, ATT, DIRECT, TONE,
MIDNIGHT mode, LOUDNESS and speakers B
cannot be operated.
• When 5.1 ch/7.1 ch input is selected, only the
volume level and channel levels can be set.
ENTER
DISC
DTV INFO MPX/RETURN
DTV ON/OFF DTV MENU
D.ACCESS GUIDE
CLASS
ATT
BAND
1 ¡ 4 ¢
7 8 3 ¶
EFFECT
DVD VCR CD-R TV
RCV TUN TVC CD
MIDNIGHT
MULTI CONTROL
5.1 / 7.1
RECEIVER SOURCE
1 2 3
4 5 6
7 8 9
0
10
2
DVD/LD
MULTICONTROL
RCV
5.1/7.1
DVD 5.1 ch./7.1 ch (5.1 ch for VSX-
D710S) input playback
If you want you can connect a component with 7.1
channel (5.1 channel for VSX-D710S) analog output to
enjoy surround sound playback. In this case the
surround sound will be externally decoded and then fed
into the receiver.
Playing other Sources
1 Turn on the power of the playback
component.
2 Turn on the power of the receiver.
Be sure that the standby indicator turns off on the
front panel.
3 Press MULTI CONTROL buttons or the
FUNCTION button to select the source you
want to playback.
If the DIRECT FUNCTION is OFF you have to use
the FUNCTION button to select the source (see
p.39).
4 If necessary, press SIGNAL SELECT to select
the input signal corresponding to the source
component (see p.29).
5 Start playback of the component you
selected in step 1.
3
2
4
ENTER
DISC
DTV INFO MPX/RETURN
DTV ON/OFF DTV MENU
D.ACCESS GUIDE
CLASS
ATT
BAND
/DTS DSP TEST TONE
CH SELECT CH LEVEL FUNCTION
SIGNAL SELECT
1 ¡ 4 ¢
7 8 3 ¶
EFFECT
DVD VCR CD-R TV
RCV TUN TVC CD
MIDNIGHT
MULTI CONTROL
5.1 / 7.1
RECEIVER SOURCE
1 2 3
4 5 6
7 8 9
0
10
2