Pioneer AVIC-F220 - Manual (Page 8)

Attaching the detachable device
1 Slide the detachable device all the way
into the base unit.
Make sure that the detachable device is se-
curely connected to the base unit terminal.
2 Press the centre of the front of the de-
tachable device until you hear a click.
If you fail to successfully attach the detach-
able device to the base unit, try again but be
careful not to force it as the unit could be da-
maged.
Charging the battery of the
detachable device
! Charging cannot be done when the tempera-
ture is outside of the charging temperature
range.
! The operating temperature range of the bat-
tery is from
–20 °C to +60 °C.
! The charging temperature range of the battery
is from 0 °C to +55 °C.
The battery of the detachable device is
charged in the following situations.
! When the detachable device is attached to
the base unit while the ignition switch is
turned on (ACC ON).
! When the detachable device is connected
to your PC.
Monitoring the battery status
You can check the battery status of the detach-
able device.
1 Touch [Home] on the map screen.
The
“Top Menu” screen appears.
2 Touch [Settings].
The
“Settings Menu” screen appears.
The battery status indicator is displayed on the
upper right of the
“Settings Menu” screen.
Engb
8
Chapter
02 Before you start