Pioneer AVIC-F220 - Manual (Page 36)

Avoid Toll Road
This setting controls whether toll roads (in-
cluding toll areas) should be taken into ac-
count.
Off*:
Calculates a route that may include toll roads
(including toll areas).
On:
Calculates a route that avoids toll roads (in-
cluding toll areas).
p The system may calculate a route that in-
cludes toll roads even if
“On” is selected.
Avoid Ferry
This setting controls whether ferry crossings
should be taken into account.
Off*:
Calculates a route that may include ferries.
On:
Calculates a route that avoids ferries.
p The system may calculate a route that in-
cludes ferries even if
“On” is selected.
Avoid Motorway
This setting controls whether motorways may
be included in the route calculation.
Off*:
Calculates a route that may include motor-
ways.
On:
Calculates a route that avoids motorways.
p The system may calculate a route that in-
cludes motorways even if
“On” is selected.
Time restrictions
This setting controls whether streets or
bridges that have traffic restrictions during a
certain time should be taken into account.
p If you want to set your route to avoid raised
draw bridges, select
“On”.
On*:
Calculates a route while avoiding streets or
bridges with traffic restrictions during a cer-
tain time.
Off:
Calculates a route while ignoring traffic re-
strictions.
p The system may calculate a route that in-
cludes streets or bridges that are subject to
traffic restrictions during a certain time
even if
“On” is selected.
CAUTION
If the time difference is not set correctly, the navi-
gation system cannot consider traffic regulations
correctly. Set the time difference correctly (
=
Refer to Setting the time difference on page 50).
Checking the current itinerary
You can check the route details.
1 Display the
“Route info” screen.
= For details, refer to Displaying the “Route
info ” screen on the previous page.
2 Touch [Profile].
The
“Route Profile” screen appears.
Editing waypoints
You can edit waypoints (locations you want to
visit on the way to your destination) and recal-
culate the route so that it passes through
these locations.
Adding a waypoint
Up to 5 waypoints can be set, and waypoints
and final destination can be sorted automati-
cally or manually.
Engb
36
Chapter
08 Checking and modifying the current route