Registering and editing your home, Correcting the current location, Checking the connections of leads – Pioneer AVIC-F220 User Manual
Page 56: Using the demonstration guidance, 12 customising preferences
Registering and editing
your home
When registering your home location, touch
[
Set Home].
= For details, refer to Registering and editing
Correcting the current location
Touch the screen to adjust the current position
and direction of the vehicle displayed on the
map.
1
Display the
“Settings Menu” screen.
= For details of the operations, refer to Dis-
2
Touch [Location].
3
Scroll to the position where you want
to set, then touch [OK].
Checking the connections
of leads
Check that leads are properly connected be-
tween the navigation system and the vehicle.
Please also check whether they are connected
in the correct positions.
1
Display the
“Settings Menu” screen.
= For details of the operations, refer to Dis-
2
Touch [Connection].
The
“Connection” screen appears.
1
2
3
1 Status
Indicates the connection status of the GPS
aerial, the reception sensitivity and from
how many satellites the signal is received.
Colour
Signal com-
munication
Used in posi-
tioning
Orange
Yes
Yes
Yellow
Yes
No
2 Handbrake*
When the handbrake is applied,
“On” is dis-
played. When the handbrake is released,
“Off” is displayed.
3 Illumination*
When the headlights or small lamps of a ve-
hicle are on,
“On” is displayed. When the
small lamps of a vehicle are off,
“Off” is dis-
played.
p Information marked with an asterisk (*) in-
dicates the status of connected AV receiver.
Proper status is displayed only when the AV
receiver is correctly connected to the navi-
gation system.
Using the demonstration
guidance
This is a demonstration function for retail
stores. After a route is set, touching this key
starts the simulation of route guidance.
1
Display the
“Settings Menu” screen.
= For details of the operations, refer to Dis-
Engb
56
Chapter
12
Customising preferences