Pioneer SC-LX76-K - Manual (Page 55)

55
05
Basic playback
Bluetooth ADAPTER for Wireless Enjoyment of Music
This receiver
Remote control
operation
Music data
Bluetooth®
ADAPTER
Bluetooth wireless
technology enabled device:
cell phone
Bluetooth wireless
technology enabled device:
Digital music player
Device not equipped with
Bluetooth wireless technology:
Digital music player
+
Bluetooth audio transmitter
(sold commercially)
! About one minute is required between turning the power on and completion of startup.
Wireless music play
When the Bluetooth ADAPTER (AS-BT100 or AS-BT200) is connected to this unit, a product equipped with
Bluetooth wireless technology (portable cell phone, digital music player, etc.) can be used to listen to music wire-
lessly. Also, by using a commercially available transmitter supporting Bluetooth wireless technology, you can
listen to music on a device not equipped with Bluetooth wireless technology. The AS-BT100 and AS-BT200 models
supports SCMS-T contents protection, so music can also be enjoyed on devices equipped with SCMS-T type
Bluetooth wireless technology.
! The Air Jam function cannot be used with the AS-BT100.
Remote control operation
The remote control supplied with this unit allows you to play and stop media, and perform other operations.
! It must be necessary that the Bluetooth wireless technology enabled device supports AVRCP profiles.
! Remote control operations cannot be guaranteed for all Bluetooth wireless technology enabled devices.
Pairing the Bluetooth ADAPTER and Bluetooth wireless technology device
“Pairing” must be done before you start playback of Bluetooth wireless technology content using the Bluetooth
ADAPTER. Make sure to perform pairing the first time you operate the system or any time pairing data is cleared.
The pairing step is necessary to register the Bluetooth wireless technology device to enable Bluetooth communi-
cations. For more details, see also the operating instructions of your Bluetooth wireless technology device.
! Pairing is required when you first use the Bluetooth wireless technology device and Bluetooth ADAPTER.
! To enable Bluetooth communication, pairing should be done with both your system and Bluetooth wireless
technology device.
! If the Bluetooth wireless technology device’s security code is “0000”, there is no need to make the security code
setting on the receiver. Press ADPT to set the ADAPTER PORT input, then conduct the pairing operation on
the Bluetooth wireless technology device. If pairing is successful, there is no need to performing the pairing
operation below.
! When using the AS-BT200 only: This unit complies with Bluetooth Specifications Ver. 2.1. When this unit and
another device equipped with Bluetooth wireless technology both comply with Bluetooth Specification Ver. 2.1,
pairing of the two may be possible without the need for inputting a password.
In this case, a passcode may be displayed on this receiver and on the device equipped with Bluetooth wire-
less technology. If this happens, check that the same passcode is displayed on this receiver and the device
equipped with Bluetooth wireless technology, then press ENTER. After this, also perform the connection
operation on the Bluetooth device to be connected. If the passcode does not match the code displayed on the
Bluetooth device to be connected, press RETURN to cancel pairing, then try starting over.
Press ADPT to set the ADAPTER PORT input, then conduct the pairing operation on the Bluetooth wireless
technology device. If pairing is successful, there is no need to performing the pairing operation below.
! Pair one unit at a time.
! When connecting this receiver by Bluetooth connections with a device equipped with the Bluetooth function to
listen to music, do not connect any devices other than this receiver by Bluetooth connection to the Bluetooth-
equipped device. If a Bluetooth connection is already established with a device other than this receiver, discon-
nect the other device before connecting this receiver.
1 Press ADPT on the remote control to switch the receiver to ADAPTER PORT input.
2 Press TOP MENU to select Bluetooth Setup.
3 Use
i/j to select ‘PIN’ then press ENTER.
4 Use i/j to select one of PIN codes 0000, 1234 or 8888, then press ENTER.
You can use any of 0000, 1234 or 8888 PIN codes. Bluetooth wireless technology device using any other PIN
code cannot be used with this receiver.
5 Press the RETURN button twice to exit Bluetooth Setup.
6 Switch on the Bluetooth wireless technology device that you want to make pair, place it
near the receiver and set it to the pairing mode.
7 From the Bluetooth wireless technology device list, select Bluetooth ADAPTER and enter
the PIN code selected in step 4.
8 Check to see that the Bluetooth ADAPTER is detected by the Bluetooth wireless technology
device.
If the receiver and Bluetooth wireless technology device are not paired, start over from step 6.
Note
! The PIN code may in some cases be referred to as PASSKEY.
! For information on enabling pairing on the Bluetooth wireless technology device, connection procedures, etc.,
see the Bluetooth wireless technology device’s operating instructions.