Using pty functions, Searching for an rds station by pty, Information – Pioneer DEH-6100BT User Manual
Page 15: Using news program interruption 15, Tuner, Searching for an rds station by pty information, Using news program interruption

4
Press TA/NEWS while a traffic an-
nouncement is being received to cancel the
announcement.
The tuner returns to the original source but re-
mains in the standby mode until
TA/NEWS is
pressed again.
Notes
! You can also turn this function on or off in the
menu that appears by using
MULTI-CONTROL.
! The system switches back to the original
source following traffic announcement recep-
tion.
! Only TP and enhanced other network’s TP sta-
tions are tuned in during seek tuning or BSM
when TA is on.
Using PTY functions
You can tune in a station by using PTY (pro-
gram type) information.
Searching for an RDS station by
PTY information
You can search for general types of broadcast-
ing programs, such as those listed in the fol-
lowing section. Refer to the next page.
1
Display the function menu.
Refer to Introduction to advanced operations
on page 13.
2
Use MULTI-CONTROL to select PTY in
the function menu.
3
Push MULTI-CONTROL left or right to
select a program type.
NEWS/INFO
—POPULAR—CLASSICS—
OTHERS
4
Press MULTI-CONTROL to begin the
search.
The unit searches for a station broadcasting
that program type. When a station is found, its
program service name is displayed.
PTY (program type ID code) information is
listed in the following section. Refer to the
next page.
# To cancel the search, press MULTI-CONTROL
again.
# The program of some stations may differ from
that indicated by the transmitted PTY.
# If no station is broadcasting the type of pro-
gram you searched for,
PTY NOT FOUND is dis-
played for about two seconds and then the tuner
returns to the original station.
Using news program interruption
When a news program is broadcast from a
PTY code news station, the unit automatically
switches to the news broadcast station. When
the news program ends, reception of the pre-
vious program resumes.
% Press TA/NEWS and hold to turn on
news program interruption.
Press
TA/NEWS until NEWS :ON appears in
the display.
# To turn off news program interruption, press
TA/NEWS and hold until NEWS :OFF appears in
the display.
# A news program can be canceled by pressing
TA/NEWS.
Note
You can also turn on or off news programs in the
menu that appears by using
MULTI-CONTROL.
Tuner
En
15
Section
04
Tuner