Tuner basic operations, Storing and recalling broadcast, Frequencies – Pioneer DEH-6100BT User Manual

Page 12: Receiving pty alarm broadcasts, Switching the rds display, Basic operations, Storing and recalling broadcast frequencies, Tuner

Basic Operations

% Selecting a band
Press

BAND/ESC.

# Band can be selected from among FM1, FM2,
FM3 or MW/LW.

% Manual tuning (step by step)
Push

MULTI-CONTROL left or right.

% Seeking tuning
Push and hold

MULTI-CONTROL left or right,

and then release.

# You can cancel seek tuning by pushing
MULTI-CONTROL left or right.
# While pushing and holding MULTI-CONTROL
left or right, you can skip stations. Seek tuning
starts as soon as you release

MULTI-CONTROL.

Notes

! This unit’s AF (alternative frequencies search)

function can be turned on and off. AF should
be off for normal tuning operation (refer to the
next page).

! RDS service may not be provided by all sta-

tions.

! RDS functions such as AF and TA are only ac-

tive when your radio is tuned to an RDS
station.

Storing and recalling
broadcast frequencies

You can easily store up to six broadcast fre-
quencies for later recall.
! Six stations for each band can be stored in

memory.

Press

/LIST.

Preset screen is displayed.

Use MULTI-CONTROL to store the se-

lected frequency in memory.
Turn to change the preset number. Press and
hold to store.

Use MULTI-CONTROL to select the de-

sired station.
Turn to change the station. Press to select.

# All stations stored for FM bands can be re-
called from each independent FM band.
# You can also change the station by pushing
MULTI-CONTROL up or down.
# To return to the ordinary display, press
BAND/ESC or

LIST.

# If you do not operate the list within about 30
seconds, the display automatically returns to the
ordinary display.

Note

You can also recall radio station frequencies as-
signed to preset tuning numbers by pushing
MULTI-CONTROL up or down during the fre-
quency display.

Receiving PTY alarm
broadcasts

When the emergency PTY code broadcasts,
the unit receives it automatically (

ALARM ap-

pears). When the broadcasting ends, the sys-
tem returns to the previous source.
! An emergency announcement can be can-

celed by pressing

TA/NEWS.

! You can also cancel an emergency an-

nouncement by pressing

SRC/OFF,

BAND/ESC or MULTI-CONTROL.

Switching the RDS display

When you tune in an RDS station its program
service name is displayed. Switch the display
to find out the frequency.

% Press DISP/SCRL.
Press

DISP/SCRL repeatedly to switch between

the following settings:
Program service name

—PTY information—

Frequency

Tuner

Section