Pioneer X-SMC1-K - Manual (Page 7)

Connections 02
7
En
English
Français
Español
Connecting to an AV receiver or amplifier
Audio signals that can be output from this
unit's HDMI OUT terminal
• 44.1 kHz to 96 kHz, 16-bit/ 20-bit/ 24-bit 2-channel linear
PCM audio (including 2-channel downmixing)
• Dolby Digital 5.1-channel audio
• DTS 5.1-channel audio
• MPEG audio
• Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of
Dolby Laboratories.
Connecting the FM antenna
Connect the FM antenna plug onto the center pin of the FM
antenna socket.
1
Connecting optional Bluetooth ® adapter
(optional)
Connect the Bluetooth ® adapter (Pioneer Model No.
AS-BT200) to AS-BT200 terminal on the rear panel.
• Open the AS-BT200 terminal’s cover and connect the
Bluetooth
® adapter with the label side facing to the right,
then close the cover.
ANTENNA
AS-BT200
LABEL SIDE
VIDEO
OUT
DC IN
19 V
FM75
HDMI
OUT
Match the direction of
the plug to the
terminal and insert
straight.
To HDMI input
terminal
HDMI cable
(commercially
available)
TV
This unit’s rear panel
To HDMI input
terminal
From HDMI
output terminal AV receiver or
amplifier
HDMI cable
(commercially
available)
Note
1 To ensure optimum reception, make sure the FM antenna is fully extended and not coiled or hanging at the rear of the unit.
ANTENNA
VIDEO
OUT
DC IN
19 V
FM75
FM wire antenna (supplied)
This unit’s rear panel
Bluetooth ® adapter
(commercially available)
This unit’s
rear panel
Cover
X-SMC1_SYXZT8_En.book 7 ページ ２０１１年６月１５日 水曜日 午後４時４４分