Pioneer X-SMC1-K - Manual (Page 15)

iPod/iPhone playback 04
15
En
English
Français
Español
3 Connect your iPod/iPhone.
• When your iPod/iPhone is not connected to the unit,
close the iPod/iPhone connector port firmly.
Connecting your TV
1
To watch iPod/iPhone images on a television, connect it using
the included video cable. For details, see Connecting using a
video cable on page 6.
• When an iPod/iPhone is connected to the unit, the TV
output setting of the iPod/iPhone is automatically set to
ON.
2
Caution
• Before making or changing the connections, switch off
the power and disconnect the power cord from the
power outlet. Plugging in should be the final step.
Playing your iPod/iPhone
Caution
• When your iPod/iPhone is connected to this unit and
you wish to operate the iPod/iPhone directly, be sure to
steady the iPod/iPhone with the other hand to prevent
malfunctions due to faulty contacts.
1 Connect your iPod/iPhone.
• If an iPod/iPhone is connected when this unit is on,
playback of the iPod/iPhone will not begin.
2 Press FUNCTION / to select iPod as the
input source.
is shown on the front panel display.
3 Press  PLAY.
• The available iPod/iPhone’s playback control by this unit
is , , , , , , .
• In the following case, operate your iPod/iPhone directly 3 :
- Searching a file by artist name or genre.
- Playing in the repeat or shuffle mode.
- Watching images stored in iPod/iPhone on your
television.
Important
If this unit can not play the iPod/iPhone when Err is displayed,
perform the following troubleshooting checks:
• Check whether the iPod/iPhone is supported by this unit.
• Reconnect the iPod/iPhone to the unit. If this doesn’t
seem to work, try resetting your iPod/iPhone.
If the iPod/iPhone cannot be operated, check the following
items:
• Is the iPod/iPhone connected correctly? Reconnect the
iPod/iPhone to the unit.
• Is the iPod/iPhone experiencing a hangup? Try resetting
the iPod/iPhone, and reconnect it to the unit.
Tip
• iPod/iPhone recharging occurs whenever an iPod/
iPhone is connected to this unit. (This function is
supported in standby mode as well.)
• When the unit is turned on while another function is
selected, playback will not automatically begin even if an
iPod/iPhone is connected.
• If the unit is set to standby when an iPod/iPhone is
connected, the iPod/iPhone’s power will be turned off
automatically.
Note
1 For detailed instructions on using the iPod/iPhone, please refer to the manual supplied with the iPod/iPhone.
2
• Some iPods allow the TV output setting to be changed while connected.
• When the iPod/iPhone is disconnected from this unit, the iPod/iPhone’s TV output setting returns to its original state.
MENU



3
2
Push
3 For detailed instructions on using the iPod/iPhone, please refer to the manual supplied with the iPod/iPhone.
X-SMC1_SYXZT8_En.book 15 ページ ２０１１年６月１５日 水曜日 午後４時４４分