Pioneer AVIC-S1 - Manual (Page 95)

User's manual AVIC-S1
Configuring AVIC-S1 - 93 -
8.2 Orientation
Orientation Use this setting to establish whether the map should be
orientated so that north is always at the top (set to north) or in
such a way that the driving direction is always at the top (driving
direction).
The current setting is displayed on the button. Touch the button
to change the setting.
Setting Meaning
Heading up The orientation in driving direction is
recommended for navigation because the
directions are shown on the map to the
right and left just as they are in reality.
North up The north alignment corresponds to the
map orientation on a printed map, but this
is impractical for navigation purposes.
8.3 Map Type
Map Type 2D/3D Use these settings to establish whether the map should be
displayed as standard in 3D or 2D.
This setting only affects the map when it is in Standard map
view. With the views Search for destination and View
destination the map is always shown in 2D (refer to chapter
Map views, page 67.)
The current setting is displayed on the button. Tap on the button
in order to change the setting.
Setting Meaning
3D Three-dimensional map view
2D Two-dimensional map view
8.4 Day / Night Display
Day / Night Display With this setting you can establish whether the map should be
displayed in day or night view. This setting also effects the
brightness of the screen.
The current setting is shown on the button. Tap on the button to
change the setting.
Setting Meaning
Day Mode Shows the map in the Day view and
switches the device's screen to day mode.
Night Mode Shows the map in Night view and switches
the device's screen to night mode.