Pioneer AVIC-S1 - Manual (Page 64)

User's manual AVIC-S1
- 62 - Itinerary (with waypoints)
No GPS Reception?
If there is no GPS signal, the following message appears:
You have the following options:
Ù You wait until navigation commences. This happens
automatically as soon as the GPS reception is sufficient to do
so.
Ù Tap on Cancel. The window opened most recently appears
again. Repeat the last input later on in order to start
navigating again.
Ù Tap on OK. The route is then calculated. The last position
known to the system is assumed as a starting point.
After the calculation the route is displayed in a map with the
last known position as a starting point. This is particularly
useful if the last known position is not all that far away from
your actual location.
As soon as the GPS reception is strong enough for navigation
purposes, the route will be recalculated and shown on the
map. Only now can the navigation begin properly.