Pioneer AVIC-S1 - Manual (Page 86)

User's manual AVIC-S1
- 84 - Search for traffic station
Note: With the automatic transmitter search, the AVIC-S1 is
constantly searching in the background for the transmitter with
the strongest signal. This ensures that you always have a perfect
TMC reception.
If the transmitter with the strongest reception is the local
transmitter, then it can of course be that the TMC reports can
only be sent for a restricted area. In this case you should
manually select an alternative transmitter.
Automatic
transmitter search
If the arrow buttons are enabled, the AVIC-S1 does not
automatically search for the strongest transmitter. The Tune
Automatically button is set to Off.
Change to automatic transmitter search as follows:
1. Tap on the Off button.
The arrow buttons are disabled. The lettering on the Tune
Automatically button changes to On.
Manual transmitter
search
If the arrow keys are not enabled, the AVIC-S1 automatically
searches for the strongest transmitter. The Tune Automatically
button is switched to On.
Change to automatic transmitter search as follows:
1. Tap on the On button.
The arrow buttons are enabled. The lettering on the Tune
Automatically button changes to Off.
2. Tap on the To the left or To the right button in order to set
the next transmitter.
3. Repeat step 2 until you have found the desired transmitter.
End transmitter
search Tap on the Back button in order to close the T RAFFIC S TATION
window and return to the T RAFFIC window.