Pioneer AVIC-S1 - Manual (Page 78)

User's manual AVIC-S1
- 76 - Waypoints
Survey The following functions are available during navigation or after
calculating a planned route:
6.1 Waypoints
Waypoints during
navigation
During navigation you can enter a new waypoint at any time. The
route is then recalculated so that the next destination will be this
waypoint. After reaching the waypoint the remaining points will
be driven to.
This is how you enter
a waypoint...
Condition: The map is displayed in S TANDARD map view.
1. Press the MENU key.
The D ESTINATION window opens.
2. In the D ESTINATION window, tap on the To the right button.
3. Tap once again on the To the right button.
4. Then tap on the Way Point button.
5. Enter the waypoint (refer to chapter "Entering a destination",
page 25)
The route is then recalculated and the entered waypoint is
approached as the next waypoint.
6.2 Skip next waypoint
Skip next waypoint
Skip Next Waypoint
This function is only available when you are navigating a route
with at least two waypoints.
Use this function if you want to skip the next waypoint.
Example: You have planned an itinerary from your office to
"Company A" and then to "Company B" and you are already on
your way. Before you arrive at "Company A", a mobile phone call
informs you that you need not visit "Company A".
Condition: The map is displayed in S TANDARD map view.
1. Press the MENU key.
The D
ESTINATION
window opens.
2. In the D
ESTINATION
window, tap on the To the right button.
3. Tap once again on the To the right button.
4. Tap on the Skip Next Waypoint button to navigate to the
waypoint after the next (here: "Company B").
The system recalculates the route. "Company B" will be your
next destination.