Pioneer BDP-430 - Manual (Page 21)

Dynamic Range Control
This lets you adjust the range between the loudest
and softest sounds (dynamic range) for playback
at average volume. Use this when it is hard to hear
dialog.
Normal: The same audio output range is played as the
original recorded audio output range.
Shift*: When Dolby Digital audio is played back, the
dynamic range of the audio is adjusted so
that the dialog portion can be heard easily. (If
the audio sounds abnormal, set to “Normal”.)
Auto : When you play back audio in the Dolby
TrueHD format, the dynamic range is
automatically adjusted.
*: Lower the audio volume before setting. If you do not do so,
the speakers may emit a loud sound or excessive output may
be applied to the speakers.
Smart Settings
Auto Power Off
This sets the Player so that power is automatically shut
off if playback is stopped for about 10 minutes.
Yes, No
Control
This sets the Player to be controlled from the Flat
Screen TV via the HDMI cable.
NOTE
For details, refer to “About Control Function with HDMI ” on •
page 13.
When “Component” is selected from the “Video Out
•
Select” menu, the control function with HDMI does not
work. If you want to use the control function with HDMI
features, select “HDMI” from the “Video Out Select” menu,
then reselect “Yes” for “Control”.
Settings
NOTE
Make sure to select a compatible digital audio output format, •
otherwise you will hear no sound or a garbled noise.
If the HDMI device (Receiver, TV) is not compatible with
•
compressed formats (Dolby digital, DTS), the audio signal
outputs as PCM.
Secondary and Effect audio is not present on DVD video.
•
This setting has no effect on the analog (L/R) audio or •
HDMI audio output to your TV. It is only valid for the optical
and HDMI audio output to a receiver.
If you play MPEG audio soundtracks, the audio signal
•
format will be PCM regardless of digital audio output format
selection (PCM or Bitstream).
Angle Mark Display
This lets you turn the Angle Mark Display on or off when
BD/DVD video recorded with multiple angles is played
back. (The angle mark is displayed in the top right of the
screen.)
Yes, No
Disc Language (Disc Priority Language)
This lets you select the language for subtitles, audio
and menus displayed on the screen.
Select the language you want to display.
Select the language you want to hear.
Select the language you want to display.
Playback Setting
Parental Control
This lets you set the Parental Control for BD-ROM/
DVD-video depending on the disc content. The
available Parental Control Levels are shown below.
The 4-digit PIN code number needs to be entered before
the Parental Control Levels and the Country Code are set.
The Parental Control Levels and the Country Code cannot
be set if a PIN code has not been created or the PIN code
is not entered.
Select the rating level appropriate for the age of the user. •
NOTE
Refer to “Basic Operation for Playback Setting” on page 20 •
for details.
Select the country code.
The ratings differ according to the country. •
8 and off: All BD-video/DVD-video can be played.
1-7: Prohibits play of BD-video/DVD-video with
corresponding ratings recorded on them.
Item (Country code)
Item (Parental control level)
PIN code Setting
This sets the PIN code for setting or changing the
Parental Control Level.
Yes: Enter the 4-digit number.
No
NOTE
When you forget the PIN code, you can reset the current •
PIN code using “System Reset” under “Settings”–
“System”. (See right.)
You can also set the new PIN code if desired.
•
BD Internet Access
This allows you to set access restriction to BD-LIVE contents.
Setting item Description of setting
Permit Allow all BD-LIVE discs.
Limit Allow only discs with owner certification.
Prohibit Prohibit all BD-LIVE discs.
NOTE
The available functions differ depending on the disc. •
Regarding playback method of BD-LIVE contents, etc., •
perform the operations in accordance with the instructions
in the BD disc manual.
To enjoy BD-LIVE functions, perform the broadband internet
•
connection (page 11) and communication settings (page 22).
Internet Setting
This allows you to restrict viewing of web contents.
Setting item Description of setting
Permit Allow access to web contents.
Limit A PIN code must be entered to access web
contents.
Prohibit Prohibits access to web contents.
NOTE
A connection to the Internet (page 11) and settings (page •
22) are required to enjoy web contents.
The “PIN code Setting” (above) must be made to change
•
the “Internet Setting”.
3D Mode
This sets how 3D discs are played.
Front Panel Display/LED
If you feel that the indicators on the Player are too
bright when watching movies, you can turn them off
except for the FL OFF indicator.
Auto : With 3D discs, the disc is played with 3D images.
Regardless of the “Audio Video Setting” setting,
videos are played at a resolution setting prioritizing
3D transfer.
2D: Even with 3D discs, the disc is played with 2D
images.
Item
21
Settings
Item
Item
Yes : Select this to operate this player with the remote
control unit of a Flat Screen TV connected by
cable. This also turns on the PQLS function.
No: Select this when you do not want to use the
control function.
Item
Item (Subtitle)
Item (Audio)
Item (Menu)
Item
Reset, Not Reset
Item
System
System Reset
You can reset all settings to the factory presets.
Item
On , Off
Item
Version
When you select “Version”, the system software
version is displayed.
Please refer to our website for information regarding
the system software updates.
IN Europe:
http://www.pioneer.eu/
IN U.K.:
http://www.pioneer.eu/
http://www.pioneer.co.uk/
IN Russia:
http://www.pioneer.eu/
http://www.pioneer-rus.ru/
IN Hong Kong:
http://www.pioneerhongkong.com.hk/
IN Singapore:
http://www.pioneer.com.sg/firmwaredownload
3D Notice
This sets whether or not to display the 3D notice when
playing 3D images.
Yes , No
Item
NOTE
The 3D indicator on the main unit front panel lights when •
3D images are being played (page 7).
The images may be played in 2D when the screen switches
•
or depending on the TV being used.
Depending on the type of 3D disc, when “2D” is set or
•
when connected to a device not supporting 3D, it may not
be possible to play the disc.
To view side-by-side contents you have recorded in 3D,
•
you must make the proper 3D setting on your TV. In this
case, this Player’s OSD will not display properly.