Pioneer RS-A9 - Manual (Page 71)

Troubleshooting
When an error occurs, locate the cause according to the list below. In most cases, the prob-
lem is incorrect connections or settings.
1. Double check the connections and settings using the Checklist.
2. If connections and settings are correct, press the system reset button.
Refer to “System Resetting” on page 7.
3. If the malfunction continues even after pressing the system reset button,
press the all clear button.
Refer to “All Clear” on page 8.
• Before pressing the all clear button, be sure to consult with your dealer.
4. If the malfunction continues even after pressing the all clear button, contact
your dealer or nearest authorized Pioneer Service Station.
Checklist
Symptom Cause Remedy Page
No Operation The battery is not Connect the battery. -------
connected.
A red lead is not Connect all red leads 61
properly connected. to the battery terminal, 65
supplied with constant
power, regardless of the
ignition switch position
after running them through
the vehicle’s fuse unit.
A black lead (ground) is Firmly connect all the black 61
not properly connected. leads to the vehicle (metal) 65
body.
The fuse is blown. Remove the cause and 61
replace with another fuse
of the same rating.
Incorrect connection. Make sure all the 58 ~ 67
connectors are properly
connected.
Unnatural sound The mode setting switches Set the mode setting 56 ~ 57
are incorrectly set. switches correctly, then
press the system reset button.
70
ENGLISH
ESPAÑOL
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS