beautypg.com

Adjusting loudness 150, Using subwoofer output 150, Using the high pass filter 150 – Pioneer AVIC-F920BT User Manual

Page 150: 27 customising preferences, Adjusting loudness, Using subwoofer output, Using the high pass filter

background image

5

Touch the frequency that you want to

adjust the level.

6

Touch [a] or [b] to adjust the level of

the equaliser band.
Each time you touch [a] or [b], the level of
the equaliser band increases or decreases.

Adjusting loudness

Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.

1

Display the

“AV Sound Settings”

screen.

= For details, refer to Displaying the “AV

Sound Settings

” screen on page 147.

2

Touch [Loudness].

Each time you touch [

Loudness], the level is

selected in the following order:
Off

— Low — Mid — High

Using subwoofer output

The navigation system is equipped with a sub-
woofer output mechanism, which can be
turned on or off.
p This function is not available when “Sub

Woofer

” is “Off”.

1

Display the

“AV Sound Settings”

screen.

= For details, refer to Displaying the “AV

Sound Settings

” screen on page 147.

2

Touch [Sub Woofer].

3

Touch [On] to turn subwoofer output

on.
To turn subwoofer output off, touch [

Off].

4

Touch [Reverse] or [Normal] to select

the phase of subwoofer output.

5

Touch [+] or [

–] next to “Level” to adjust

the output level.
“+6” to “–24” is displayed as the level is in-
creased or decreased.

6

Touch [c] or [d] next to

“Frequency(Hz)” to select cut-off fre-
quency.
Each time you touch [c] or [d], cut-off fre-
quencies are selected in the following order:
50Hz

— 63Hz — 80Hz — 100Hz — 125Hz

Only frequencies lower than those in the se-
lected range are output from the subwoofer.

Using the high pass filter

When you do not want low sounds from the
subwoofer output frequency range to play
from the front or rear speakers, activate

HPF

(high pass filter). Only frequencies higher than
those in the selected range are output from
the front or rear speakers.

1

Display the

“AV Sound Settings”

screen.

= For details, refer to Displaying the “AV

Sound Settings

” screen on page 147.

2

Touch [HPF].

Each time you touch [

HPF] selects cut-off fre-

quencies in the following order:
Off

— 50Hz — 63Hz — 80Hz — 100Hz —

125Hz

Engb

150

Chapter

27

Customising preferences

This manual is related to the following products: