Pioneer AVIC-F920BT - Manual (Page 15)

2 Touch [Disc Eject].
The disc is ejected.
Inserting and ejecting an
SD memory card
WARNING
Ejecting an SD memory card during data transfer
can damage the SD memory card. Be sure to
eject the SD memory card by following the proce-
dure described in this manual.
CAUTION
If data loss or corruption occurs on the storage
device for any reason, it is usually not possible to
recover the data. Pioneer accepts no liability for
damages, costs or expenses arising from data
loss or corruption.
p This system is not compatible with Multi
Media Card (MMC).
p Compatibility with all SD memory cards is
not guaranteed.
p This unit may not achieve optimum perfor-
mance with some SD memory cards.
Inserting an SD memory card
(for AVIC-F20BT)
p This section describes operations for AVIC-
F20BT.
CAUTION
! Do not press the h button when an SD mem-
ory card is not fully inserted. Doing so may da-
mage the card.
! Do not press the h button before an SD mem-
ory card has been completely removed. Doing
so may damage the card.
1 Press the h button.
The
“Monitor Setup” screen appears.
2 Touch [SD Insert].
The LCD panel opens, and the SD card slot ap-
pears.
3 Insert an SD memory card into the SD
card slot.
Insert it with the label surface facing to the up-
side and press the card until it clicks and com-
pletely locks.
4 Press the h button.
The LCD panel closes.
p If data related to map data, such as custo-
mised POI data, is stored on the SD mem-
ory card, the navigation system restarts.
Engb
15
Chapter
02
Basic
operation
Basic operation