Pioneer AVIC-F920BT - Manual (Page 14)

CAUTION
! Do not open or close the LCD panel by force.
This may cause malfunction.
! Do not operate this navigation system until
the LCD panel completely opens or closes. If
this navigation system is operated while the
LCD panel is opening or closing, the LCD
panel may stop at that angle for safety.
! Do not place a glass or a can on the open
LCD panel. Doing so may break this naviga-
tion system.
! Do not insert anything other than a disc into
the disc loading slot.
1 Press the h button.
The
“Monitor Setup” screen appears.
2 Touch [Open].
The LCD panel opens, and the disc loading
slot appears.
3 Insert a disc into the disc loading slot.
The disc is loaded, and the LCD panel closes.
Ejecting a disc (for AVIC-F20BT)
p This section describes operations for AVIC-
F20BT.
1 Press the h button.
The
“Monitor Setup” screen appears.
2 Touch [Disc Eject].
The LCD panel opens, and the disc is ejected.
3 Remove the disc, and press the h but-
ton.
The LCD panel closes.
Inserting a disc (for AVIC-F920BT,
AVIC-F9210BT and AVIC-F9220BT)
p This section describes operations for AVIC-
F920BT, AVIC-F9210BT, and AVIC-F9220BT.
% Insert a disc into the disc loading slot.
p Do not insert anything other than a disc
into the disc loading slot.
Ejecting a disc (for AVIC-F920BT,
AVIC-F9210BT and AVIC-F9220BT)
p This section describes operations for AVIC-
F920BT, AVIC-F9210BT, and AVIC-F9220BT.
1 Press the h button.
The touch panel keys for ejecting the media
appear.
Engb
14
Chapter
02 Basic operation