Auto eq (auto-equalizing), System settings – Pioneer AVH-X8500BT User Manual

Page 65

! Change this setting if the display switches

to the rear view camera video by error while
you are driving forward.

! To stop watching the rear view camera

video and return to the source display,
press and hold

MUTE.

! Touch the RearView icon to display the

rear view camera image while driving.
Touch the source icon again to turn the
rear view camera off. For details, refer to Se-
lecting a source on page 11.

Press the home button to switch to the

home display.

Touch the system key to open the sys-

tem menu.

Touch Camera Polarity on the system

menu to select the appropriate setting.

! Battery – When the polarity of the con-

nected lead is positive while the shift lever
is in REVERSE (R) position

! Ground – When the polarity of the con-

nected lead is negative while the shift lever
is in REVERSE (R) position

! Off – When a rear view camera is not con-

nected to this unit

! The rear view key setting also turns off on

the home display screen.

Auto EQ (auto-equalizing)

The auto-equalizer automatically measures
the car

’s interior acoustic characteristics, and

then creates an auto-equalizer curve based on
that information.
! To perform this function, dedicated micro-

phone (e.g. CD-MC20) is required.

WARNING

As a loud tone (noise) may be emitted from the
speakers when measuring the car

’s interior

acoustic characteristics, never perform auto TA
or auto EQ while driving.

CAUTION

! Thoroughly check the conditions before per-

forming auto EQ as the speakers may be da-
maged if these functions are performed when:
— The speakers are incorrectly connected.

(For example, when a rear speaker is con-
nected as a subwoofer output.)

— A speaker is connected to a power amp de-

livering output higher than the speaker

’s

maximum input power capability.

! If the microphone is placed in an unsuitable

position the measurement tone may become
loud and measurement may take a long time,
resulting in battery drainage. Be sure to place
the microphone in the specified location.

Section

System

settings

System settings