Pioneer AVH-X8500BT - Manual (Page 18)

Radio text data transmitted by RDS stations,
such as station information, the name of the
currently broadcast song and the name of the
artist, can be displayed on this tuner.
! When no radio text is received, No Text ap-
pears in the display.
Storing and recalling radio
text
You can store data from up to six radio text
transmissions to the
Memo1 to Memo6 keys.
1 Display the radio text you want to
store in the memory.
Refer to Tuner operations on page 17.
2 Touch and hold one of the keys to store
the selected radio text.
The memory number is displayed and the se-
lected radio text will be stored in the memory.
The next time you press the same key in radio
text display the stored text will be recalled
from the memory.
Storing the strongest stations
BSM (best stations memory) automatically
stores the six strongest stations in the order of
their signal strength.
Storing broadcast frequencies with BSM may
replace broadcast frequencies you have saved
using the preset channel keys.
1 Display the preset screen.
Refer to Tuner operations on page 17.
The preset screen appears in the display.
2 Touch BSM to turn BSM on.
The six strongest broadcast frequencies will
be stored under preset channel keys in order
of their signal strength.
# To cancel the storage process, touch
Cancel.
Tuning in to strong signals
Local seek tuning allows you to tune in to only
those radio stations with sufficiently strong
signals for good reception.
FM: Off
— — — —
MW/LW: Off
— —
The more there are on the screen, the fewer
the stations that can be selected. Only stations
with the strongest signals in your local area
can be selected.
If there are fewer
, this unit will be able to re-
ceive broadcasts from weaker stations.
Using iTunes tagging
For more details about iTunes tagging, refer to
About iTunes tagging on page 87.
Storing the tag information to
this unit
1 Tune in to the broadcast station.
2 Store the tag information to this unit.
Refer to Tuner operations on page 17.
You can store the information if the
Tag indica-
tor is displayed while the desired song is being
broadcast.
# While storing the tag data on this unit, Tag
flashes.
# The tag information for up to 50 songs can be
stored on this unit.
# Depending on the timing of when the tag in-
formation is stored, the tag information for the
song played before or after the currently playing
song may also be stored.
# If an SD is selected as the source while tag in-
formation is being stored to this unit, the tag in-
formation will not be transferred to the iPod.
3 When completed, indicator turns
off and indicator is displayed.
En
18
Section
06 Tuner