Using subwoofer output, Boosting the bass, Using the high pass filter – Pioneer AVH-X8500BT User Manual
Page 54: Adjusting source levels, 15 audio adjustments
3
Touch c or d to select a desired level
for loudness.
Off (off)
—Low (low)—Mid (mid)—High
(high)
Using subwoofer output
This unit is equipped with a subwoofer output
which can be turned on or off.
! The cut-off frequency and output level can
be adjusted when the subwoofer output is
on.
1
Press the home button to switch to the
home display.
2
Touch the audio function key to open
the audio menu.
3
Touch Subwoofer on the audio function
menu.
4
Touch On or Off next to Subwoofer to
turn the subwoofer output on or off.
5
Touch Normal or Reverse next to Phase
to select the phase of subwoofer output.
6
Touch c or d next to Level to adjust
the output level of the subwoofer.
Range:
+6 to
–24
7
Touch c or d next to Frequency to se-
lect the cut-off frequency.
50Hz
—63Hz—80Hz—100Hz—125Hz
Only frequencies lower than those in the se-
lected range are outputted from the sub-
woofer.
Boosting the bass
You can boost the bass level.
1
Press the home button to switch to the
home display.
2
Touch the audio function key to open
the audio menu.
3
Touch c or d to select a desired level.
Range:
0 to +6
Using the high pass filter
When you do not want low sounds from the
subwoofer output frequency range to play
from the front or rear speakers, turn on the
HPF (high pass filter).
1
Press the home button to switch to the
home display.
2
Touch the audio function key to open
the audio menu.
3
Touch c or d next to the frequency to
select cut-off frequency.
Off (off)
—50Hz—63Hz—80Hz—100Hz—
125Hz
Only frequencies higher than those in the se-
lected range are output from the front or rear
speakers.
Adjusting source levels
With SLA (source level adjustment), the vo-
lume levels of each source can be adjusted to
prevent significant differences between
sources.
! Settings are based on the FM volume level,
which remains unchanged.
1
Press the home button to switch to the
home display.
2
Touch the audio function key to open
the audio menu.
3
Compare the FM volume level with the
level of the source you wish to adjust.
4
Touch Source Level Adjuster on the
audio function menu.
En
54
Section
15
Audio adjustments