Using the radio (fm) reading the screen, Operating by hardware buttons, Reading the screen – Pioneer AVIC-F310BT User Manual
Page 78: Using the radio (fm)
You can listen to the radio by using the naviga-
tion system. This section describes operations
for radio (FM).
The functions related to RDS (Radio Data Sys-
tem) are available only in areas with FM sta-
tions broadcasting RDS signals. Even if the
navigation system is receiving an RDS station,
not all the functions related with RDS will be
available.
% Press SRC/OFF button to display the
“TUNER” screen.
= For details, refer to Switching the audio op-
Reading the screen
1 Source icon
Shows which source has been selected.
2 Band
Shows which band the radio is tuned to: FM1
to FM3.
3 Preset number indicated next to “P.CH”
Shows what preset item has been selected.
4 PTY
Shows the programme type of the current sta-
tion (when available).
5 Frequency
6 Programme service name
Shows the programme service name (station
name) of the current station. If the pro-
gramme service name (station name) cannot
be received, the frequency will be displayed in-
stead.
7 NEWS indicator
Shows when the set news programme is re-
ceived.
8 TRFC indicator
Shows when a TP station (a station that broad-
casts traffic information) is tuned in.
9 Signal level indicator
a Touch panel keys
to
:
Recalls radio stations.
= For details, refer to Storing and recalling
broadcast frequencies on the next page.
b Local indicator
Shows when local seek tuning is on.
= For details, refer to Tuning in strong sig-
c STEREO indicator
Shows when the selected frequency is being
broadcast in stereo.
Operating by hardware
buttons
Pressing BAND/ESC button
Band can be selected from among
FM1, FM2,
FM3, or MW/LW.
Pressing MULTI-CONTROL up or down
You can recall radio stations assigned to pre-
set tuning keys
to
.
Pressing MULTI-CONTROL left or right
The frequencies move up or down step by
step.
Pressing and holding MULTI-CONTROL
left or right
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
p You can cancel seek tuning by pressing
MULTI-CONTROL left or right.
Pressing the centre of MULTI-CONTROL
The function select screen appears.
Using the radio (FM)
Engb
78
Chapter
15