Switching the audio, Switching the secondary audio (bdp-450 only), Switching the secondary video (bdp-450 only) – Pioneer BDP-450-K User Manual
Page 30: Switching the cd/sacd playback area

04
30
En
About displaying external subtitle
files while playing DivX media files
In addition to the subtitles recorded in DivX media files,
this player also supports the display of external subtitle
files. If a file has the same name as that of a DivX media
file aside from the file extension and the extension is one
of the extensions listed below, the file is treated as an
external subtitle file. Note that DivX media files and
external subtitle files must be located in the same folder.
Only one external subtitle file can be displayed on this
player. Use a computer, etc., to delete any external
subtitle files you do not want to display from the disc.
Note
• Depending on the file, the external subtitles may not
be displayed properly.
Switching the audio
For discs or files on which multiple audio streams/
channels are recorded, audio streams/channels can be
switched during playback.
During playback, press AUDIO.
• The current audio and total number of recorded audio
streams are displayed on the TV screen.
To switch the audio, press
AUDIO
again.
• The audio can also be switched by selecting
Audio
from the
FUNCTION menu.
• If the audio is not switched when
AUDIO is pressed,
switch it from the disc menu screen.
Switching the secondary
audio (BDP-450 only)
Use this procedure to switch the secondary audio for BD-
ROMs on which secondary audio is recorded.
During playback, press 2nd AUDIO.
• The current audio and total number of recorded audio
streams are displayed on the TV screen.
To switch the audio, press
2nd AUDIO
again.
• The secondary audio can also be switched by
selecting
Secondary Audio from the FUNCTION
menu.
• If the secondary audio is not switched when
2nd AUDIO is pressed, switch it from the disc menu
screen.
Turning the Secondary Audio off
Press 2nd AUDIO several times or select
Secondary Audio from the FUNCTION menu to
switch the setting to Off.
Switching the secondary
video (BDP-450 only)
Use the procedure below to switch the secondary video
(Picture-in-Picture) recorded on the BD-ROM.
During playback, press 2nd VIDEO.
• The current secondary video and total number of
recorded secondary video streams are displayed on
the TV screen.
To switch the secondary video, press
2nd VIDEO
again.
• The secondary video can also be switched by
selecting
Secondary Video from the FUNCTION
menu.
• If the secondary video is not switched when
2nd VIDEO is pressed, switch it from the disc menu
screen.
Turning the Secondary Video off
Press 2nd VIDEO several times or select
Secondary Video from the FUNCTION menu to switch
the setting to Off.
Switching the CD/SACD
playback area
1
Select the area you want to play.
In the stop mode, press
CD/SACD. The playback area
switches on the front panel display window each time the
button is pressed.
[CD AREA]
[SACD 2CH] [SACD MCH] (back to
beginning)
• During playback, press
STOP twice to cancel
continuous play before selecting the playback area.
• For the BDP-150, after selecting the playback area,
press
OPEN/CLOSE to open or close the disc tray.
Once the disc is loaded, the playback area switches.
Secondary audio/video
Primary audio/video
BDP-450_VXE8_IBD_EN.book 30 ページ 2012年6月22日 金曜日 午後2時11分