Pioneer BDP-450-K - Manual (Page 23)

23
En
02
Connecting to the
network through LAN
interface
By connecting this player to the network via the LAN
terminal, you can play audio files stored on the
components on the network, including your computer,
using HOME MEDIA GALLERY inputs.
Connect the LAN terminal on this receiver to the LAN
terminal on your router (with or without the built-in DHCP
server function) with a straight LAN cable (CAT 5 or
higher).
Turn on the DHCP server function of your router. In case
your router does not have the built-in DHCP server
function, it is necessary to set up the network manually.
For details, see Setting the IP address on page 45 .
 LAN terminal specifications
LAN terminal: Ethernet jack (10BASE-T/100BASE-TX)
Note
• Refer to the operation manual of the equipment you
have as the connected equipment and connection
method may differ depending on your Internet
environment.
• When using a broadband Internet connection, a
contract with an Internet service provider is required.
For more details, contact your nearest Internet
service provider.
Connecting to a wireless LAN
Wireless connection to the network is possible through a
wireless LAN connection. Use the separately sold
AS
- WL300 for connection.
• Refer to the operating instructions of AS-WL300 for
the setting details.
Connecting the power
cord
Connect the power cord after all the connections between
devices have been completed.
WAN 3 2 1
LAN
LAN cable
(commercially available)
Router
Internet
Modem LAN cable
(commercially
available)
PC
BDP-450’s rear panel
WAN
DC 5V WPS Ethernet
Router
Internet
Modem
Wireless LAN
converter
(AS-WL300)
BDP-450’s rear panel
LAN/USB feeder cable
(included with the AS-
WL300)
BDP-450’s rear panel
Power cord
(included)
To wall outlet
BDP-450_VXE8_IBD_EN.book 23 ページ ２０１２年６月２２日 金曜日 午後２時１１分