beautypg.com

Menu setting method, Autopoweroff, Fn setting – Olympus LS-10 User Manual

Page 40

background image

40

M

enu
Setting

4

4 Others (Continued)

AutoPowerOff

Forgetting to turn the power off can be prevented. If the recorder remains in stop

mode for over 10 minutes (Initial setting) while the power is turned on, the power will

be turned off.

Setting:

[5 minutes] [10 minutes] [30 minutes] [60 minutes]: Set the length of time

before the power will be turned off.

[Off]: Disables this function.

• If any button is pressed, the elapsed time count before the power turns off will start

over again.

Fn Setting

When functions are registered in the Fn button, each time the Fn button is pressed, you

can set or change the menu of registered function.

Setting:

[Off]: No functions will be allocated to the button.
[Rec Mode] (

☞ P.36)

[Rec Level]: (

☞ P.36)

[Zoom Mic] (

☞ P.36)

[Play Mode] (

☞ P.37)

[Reverb] (

☞ P.38)

[EUPHONY] (

☞ P.38)

[MemorySelect] (

☞ P.39)

[Property] (

☞ P.41)

[Light] (

☞ P.38)

To call up a registered function:

When the Fn button is pressed, menu setting display of registered function

will appear:
[Rec Mode]:

[PCM] [MP3] [WMA]: The recording rate can be configured
for each file format.

[Rec Level]:

[Manual] [Auto]: You can configure whether to adjust the

recording level automatically or to adjust it manually. When

the [Rec Level] is set to [Manual] you can configure the
limiter function.

[Zoom Mic]:

[Off] [Wide] [Standard] [Narrow] [Zoom]

[Play Mode]:

[ File] [ File Repeat] [ Folder] [ Folder Repeat] [All]
[All Repeat]

[Reverb]:

[Normal] [Studio] [Club] [Hall] [Dome]

[EUPHONY]:

[Normal] [Natural] [Wide] [Power]

[MemorySelect]:

[Built-in Memory] [SD card]

[Property]:

File and folder information can be confirmed from the menu
screen.

Each time the Fn button is pressed, the setting of registered function is changed:
[Light]:

[On] [Off]: Select backlight on or off by pressing the Fn
button.

• When the registered function is [Rec Mode], [MemorySelect], or [Property], these

will not function if the Fn button is pressed during recording or playback. While the

recorder is during stop mode, press the Fn button.

Menu Setting Method