Olympus LS-10 - Manual (Page 37)

37
M
enu
Setting
4
4 Rec Menu (Continued)
Rec Monitor
Select whether or not to output audio while recording from the earphone jack.
Setting:
[On]: Enables the recording monitor function. Sound will be output from the
EAR jack.
[Off]: Disables this function. Sound will not be output from the EAR jack.
• When the external speaker is connected while recording, there is a risk that audio
feedback will occur. It is recommended that you use earphones for the recording
monitor, or turn [Rec Monitor] to [Off] while recording ( ☞ P.24).
• When [Rec Monitor] is set to [ r Off] no sound will come out of the earphones while you
are recording ( ☞ P.24).
Plug-inPower
External microphones which are supported by plug in power can also be used. Whether
or not to supply power to external microphones can be configured.
Setting:
[On]: When the plug-in power function is activated, power will be supplied to
the connected external microphone. Select this when external microphones
supported by plug-in power are connected (
☞ P.25).
[Off]: Disables this function. Select this when external microphones not supported
by plug-in power are connected.
• Turn the plug-in power function to [Off] when an external microphone not supported
by plug-in power is connected, as there is the risk that noise may be generated while
recording.
• Phantom power cannot be supplied, even when the plug in power function is set to [On].
4 Play Menu
Play Mode There are six play modes. You can select whether to play by file or folder, or all files
stored in the recorder.
Setting:
[File]: Stop after playing back the current file.
[File Repeat]: Play the current file repeatedly.
[Folder]: Play files continuously in the current folder until the last file and stop.
[Folder Repeat]: Play all files in the current folder continuously.
[All]: Play all files in the selected memory continuously and stop.
[All Repeat]: Play all files in the selected memory continuously and repeatedly.
• In [File] mode, when the recorder comes to the end of the last file in the folder, [End]
flashes for two seconds on the display and the recorder stops at the start of the last file.
• In [Folder] mode, when the recorder comes to the end of the last file in the folder, r [End]
flashes for two seconds on the display and the recorder stops at the start of the first file
in the folder.
• In [All] mode, after playing the last file in the folder, the recorder will start playing from the
first file in the next folder. When it comes to the end of the last file in the recorder, [End]
flashes for two seconds on the display and the recorder stops at the start of the first file
in the recorder.
Menu Setting Method