Olympus LS-10 - Manual (Page 14)

14
Get
ti
ng
S
ta
rte
d
1
2 3 button
`/OK button
When you insert the
card, the recording
media changeover
display will appear
Inserting and Ejecting a Card
Inserting a Card
1 While the recorder is during stop mode,
open the card cover.
2
Face the card the correct way and
insert it into the card slot as shown
in the diagram.
• Insert the card keeping it straight.
• The card stops with a click when it is
inserted all the way.
• Inserting the card the wrong way or at an
angle could damage the contact area or
cause the card to jam.
• If the card is not inserted all the way, data
may not be written to the card.
3
Close the card cover securely.
4
When you are recording to a card,
press the 2 or 3 button and select
[ Yes].
5 Press the `/OK button to complete
the setup screen.
This recorder can be used with commercially
available SD Cards as well as the built-in flash
memory.