Olympus LS-3 - Manual (Page 65)

65
4
EN
Menu setting method
Menu setting method
When you select [1file]:
1 Press the + or − button to select the file
you want to move or copy.
2 Press the `OK button to select the file.
When you select [Selected files]:
1 Press the + or − button to select the file
you want to move or copy.
2 Press the `OK button to check the file(s)
selected.
3 Repeat steps 1 and 2 until all the files
you want to move/copy are selected then
press the F2 (GO) button.
8 Press the F2 (GO) button.
• File move or file copy will start if
[Moving!] or [Copying!] appears
on the display. During the process,
the progress status will be shown in
percentage. The process is completed
when [File move completed] or [File
copy completed] is displayed.
Notes
• The recorder cannot copy when the
memory capacity is not sufficient.
• The recorder cannot move or copy when
the number of files exceeds 200.
• Do not remove the batteries during
moving or copying. This may damage the
data.
• A file cannot be moved or copied to the
same folder.
• When the operation is canceled during
moving or copying, only the operation on
the file that is being moved or copied is
effective, all other files will not be moved
or copied.
• Files which are locked will remain so even
after they are moved or copied.
• DRM files cannot be moved or copied.
• Files cannot be moved or copied directly
under the [Recorder] folder.
When you select [All files]:
When all files are selected, all the files in the
folder will be automatically selected and the
recorder will move to the [Folder to move]
screen.
7 Press the
9 , 0 or + , −
button to select the folder you
want to move or copy the file to.