Menu setting method, Device menu – Olympus LS-3 User Manual

Page 61

Menu setting method

Time & Date

See “Setting time and date [Time & Date]”
(

☞ P.22).

USB Settings

See “Changing the USB class
[USB Settings]” (

☞ P.73).

Reset Settings

This returns the functions back to their initial
settings (factory default).
[Start]: Returns the settings to their initial

values.

[Cancel]: Takes you back to [Device Menu].
• After resetting the settings, the time

settings, file numbers and folder name
will be preserved, without returning to
their initial settings.

Menu settings after resetting (initial
settings):

, Rec Menu:

[Mic Select] [Central Mic ON]
[Mic Sense] [Middle]
[Rec Mode]
[PCM]

[44.1kHz]

[Rec Level] [Manual]

([Limiter ON])

[Zoom Mic] [Off]
[Low Cut Filter] [Off]
[VCVA]

[Off]

[On/Off] [Off]
[Standby] [Off]
[V-Sync. Rec] [Off]
[Timer Rec] [Off]
[Rec Scene] [Off]
[Rec Monitor] [Off]
[Plug-inPower] [On]
[Pre-Recording] [Off]

- Play Menu:

[Noise Cancel] [Off]
[EUPHONY] [Off]
[Voice Filter] [Off]
[Play Mode]
[Play Area] [File]
[Repeat] [Off]
[Random] [Off]

/ Device Menu

Memory Select

When a microSD card is inserted you
can select to record to either the built-in
memory or to the microSD card (

☞ P.24).

[Built-in Memory]: Built-in memory.
[microSD Card]: microSD card.

Power Save

Forgetting to turn the power off can be
prevented. If the recorder remains in stop
mode for over 10 minutes (Initial setting)
while the power is turned on, the power will
be turned off.
[5minutes] [10minutes] [30minutes]
[1hour]:

Set the length of time before the power
will be turned off.

[Off]: Disables this function.
• If any button is pressed, the elapsed time

count before the power turns off will start
over again.

Battery

Select to match the battery you are using.
[Ni-MH] (

õ):

Select when using the Olympus Ni-MH
rechargeable batteries (BR404).

[Alkaline] (

ú):

Select when using alkaline batteries.

Folder Name

You can change the folder names of Folder

to Folder

* for audio recording into names

preset in the template. You can also change
folder names registered in the template with
“Olympus Sonority”.

Select a folder that you want to

rename.

Select a folder name from the

preset templates.