Olympus LS-3 - Manual (Page 15)

15
1
EN
Po
we
r s
u
p
p
ly
Power supply
Inserting batteries
This recorder can be used with either Ni-MH
Rechargeable Batteries or AAA Alkaline
Batteries.
• When charging with the recorder,
be sure to use the supplied Ni-MH
rechargeable batteries (BR404).
• The supplied rechargeable
batteries are not fully charged.
Before using the recorder or
after long periods of disuse,
it is recommended that you
continuously charge them until
full (
☞ P.17).
1 Lightly press down on the arrow
and slide the battery cover open.
2 Insert the batteries, observing
the correct
= and - polarities.
3 Close the battery cover
completely by pressing to the
direction
A, then sliding to the
direction
B.