47 en – Olympus TG835 User Manual

Page 47

Submenu 2

Application

Reset

This resets the sequential number
for the folder name and fi le name
whenever a new card is inserted.

This is useful when grouping
images on separate cards.

Auto

Even when a new card is inserted,
this continues the numbering for
the folder name and fi le name
from the previous card. This is
useful for managing all image
folder names and fi les names with
sequential numbers.

The number for the folder name is reset to 100,

and the one for the fi le name is reset to 0001.

Adjusting the image processing

Adjusting the image processing
function

function

dd [Pixel Mapping]

[Pixel Mapping]

● This function has already been adjusted at factory

shipping, and no adjustment is needed right
after purchase. Approximately once a year is
recommended.

● For best results, wait at least one minute after

taking or viewing pictures before performing pixel
mapping. If the camera is turned off during pixel
mapping, be sure to perform it again.

To adjust the image processing function

Press the

A button when [Start] (Submenu 2) is

displayed.

● The check and adjustment of the image

processing function starts.

Adjusting the brightness of the

Adjusting the brightness of the
monitor

monitor

dd [ [s

s]]

To adjust the monitor brightness

Use

FG to adjust the brightness while viewing

the screen, and then press the

A button.

MENU

Back