Olympus µ 1050 SW - Manual (Page 48)

EN
Operating the camera by tapping the body [TAP CONTROL]
x SETUP  TAP CONTROL
Submenu 2 Application
OFF Cancels [TAP CONTROL]
ON [TAP CONTROL] is activated.
CALIBRATE
Adjusts the tap strength and intervals between multiple taps on each side of the camera
body. (top, left, right, & back)
Functions available when [TAP CONTROL] is set to [ON]
Camera’s top [TOP]: Tap twice
Confirms the selected menu.
Switches [TAP CONTROL] to [ON] or [OFF]. (p. 4)
●
●
Camera’s right side [RIGHT]: Tap once
Sets the flash mode.
(p. 21)
Camera’s back [BACK]: Tap once
Switches to playback mode.
(p. 49)
Camera’s left side [LEFT]:
Tap once
Sets [SHADOW ADJ.].
(p. 20)
Operating during shooting mode (Example: Flash mode)
1
Tap the right side of the camera body once.
P
OK OK
AUTO
SET
FLASH AUTO
AUTO ! # $
//
When tapping the camera’s top
The flash mode selection screen is displayed.
2
Tap the right or left side of the camera body to select a
function.
3
Tap the top of the camera body twice to confirm your
selection.
Tap the camera firmly using the pad of your finger.
When the camera is stabilized on a tripod for example, tap control
may not work properly.
To prevent dropping the camera when using tap control, strap the
camera to your wrist.
●