Olympus E-450 - Manual (Page 98)

Usi
ng
the OL
YMP
U
S
Ma
ster
sof
tw
a
re
11
98
EN
Connect the camera to your computer with the provided USB cable.
1
Use the provided USB cable to connect the computer’s USB port to the camera’s
multi-connector.
• The location of the USB port varies with the computer. For details, refer to your computer’s
manual.
2
Set the camera’s power switch to ON.
• The selection screen for the USB connection is displayed.
3
Press ac to select [STORAGE]. Press the i
button.
4
The computer recognizes the camera as a new
device.
Windows
• When you connect the camera to the computer for the first
time, the computer automatically recognizes the camera.
Click “OK” when the message saying that the installation is completed appears.
The computer recognizes the camera as a “Removable Disk
”.
Macintosh
• iPhoto is the default image management application for Mac OS. When you connect your
Olympus digital camera for the first time, iPhoto will start up automatically. Close iPhoto and
start OLYMPUS Master.
x
Notes
• When the camera is connected to the computer, none of the camera buttons are functional.
Connecting the camera to a computer
Look for this
mark.
Smaller terminal
Terminal USB port
USB cable
Multi-connector
E-450_MASTER.fm Seite 98 Donnerstag, 16. April 2009 10:40 10