Olympus E-450 - Manual (Page 65)

R
ecor
d m
ode,
whi
te
balance
, and
picture m
ode
6
65
EN
This function reduces the noise that is generated during long exposures. When shooting night
scenes, shutter speeds are slower and noise tends to appear in images. With [NOISE
REDUCT.], you can let the camera reduce noise automatically to produce clearer images.
When set to [AUTO], noise reduction will be activated only when the shutter speed is slow.
When set to [ON], noise reduction will always be activated. While noise reduction is activated, it
takes about twice the usual time to take a picture.
• The noise-reduction process is activated after shooting.
• The card access lamp blinks during the noise-reduction process. You cannot take more
pictures until the card access lamp turns off.
• [busy] is displayed on the viewfinder while noise reduction is operating.
x
Notes
• When the Y mode is set to X , [NOISE REDUCT.] is fixed to [ON].
• During sequential shooting, [NOISE REDUCT.] is [OFF] automatically.
• This function may not work effectively with some shooting conditions or subjects.
You can select the noise processing level. Use [STANDARD] for general use. [HIGH] is
recommended during high sensitivity shooting.
Noise reduction
Menu
MENU[W][NOISE REDUCT.]
Noise filter
Menu
MENU[W][NOISE FILTER]
ON/AUTO OFF
E-450_MASTER.fm Seite 65 Donnerstag, 16. April 2009 10:40 10