Olympus C-4040 Zoom - Manual (Page 21)

Date/time setting
3 Press í on the arrow pad to select
MODE MENU.
● In this step and the following steps, the
screens show examples of the menus
displayed in the P mode.
4 Press ñ to select SETUP, then press
í
.
● The items in the SETUP menu appear.
5 Press Ññ to select , then press í .
● The screen appears.
DRIVE
WB
MODE MENU
Chapter 1
It is possible to set the date/time of the built-in clock. Since the date/time is
saved with recorded pictures, be sure to set it correctly.
1 Set the mode dial to any
position except OFF.
● Be sure to remove the lens cap
beforehand since the lens
automatically extrudes when the
mode dial is set to any position
except .
2 Press to display Menu
(P. 43).
● The monitor turns on
automatically.
m
SETUP
CAM
CARD
PIC
BA BATTER TTERY SA Y SAVE VE
SHOR SHORT CUT T CUT
m/ft m/ft
’01.01.01 01.01.01
00:00 00:00
SETUP
CAM
CARD
PIC
LOW LOW
ON ON
ON ON
RESET RESET
REC VIEW
FILE NAME FILE NAME
PIXEL MAPPING PIXEL MAPPING
ALL RESET ALL RESET
21
How to use this manual
The instructions in this manual use a series of numbers for each operating
procedure and button/dial illustration. Follow these numbers in order when
operating the camera.
Example 1
If a button is
shown in black,
press it as part
of the step.
Set the mode dial to the position shown in the illustration. In
this example, you would set P.
Means “Press
this button”.
С
,
с
,
Й
and
í
used in instructions correspond
to the buttons on the arrow pad as shown.
С
с
Й н