Olympus C-4040 Zoom - Manual (Page 164)

164
Chapter 10
Connecting directly to a computer by
cable (Cont.)
Installing a USB driver when using Windows 98/98SE
1 Connect the camera to the computer
and set the mode dial to
(see
“How to connect”).
● A window appears saying that the
computer has recognized the camera
as a “New Device (hardware)”.
2 Click on the “Next” button.
3 Confirm that “Search for the best
driver for your device
(Recommended)” is selected, then
click on the “Next” button.
4 Place the software CD in the CD-ROM drive and wait until the CD is
recognized.
● If a window automatically appears when the CD is ready, click on the
“Exit” button and erase the window.
5 Remove the check marks next to
“Floppy disk drive” and “CD-ROM
drive”, add one next to “Specify a
location”, and click on the “Browse”
button.