Olympus SP-510 UZ - Manual (Page 61)

EN
61
U
sing OLYMPUS
Mas
ter
2
Plug the USB cable into the USB port on
the computer.
3
Plug the other end of the USB cable into
the camera’s USB connector.
• The camera turns on automatically.
• The monitor turns on and the selection screen for the
USB connection is displayed.
4
Select [PC], and press o.
5
Click “OK”.
• OLYMPUS Master will recognize the
actual Version of your camera now.
• Click “Check for latest Version” and the
Software is searching at the Olympus
Homepage for new Camera firmware
versions and for additional languages.
Then you can select an additional
language.
6
After clicking “Update”
OLYMPUS Master is now
downloading the new
language to your camera.
Please do not remove any
cable or the battery while the
camera is processing.
7
After the download procedure
the camera display will show OK. You can remove the cables and turn
Power OFF. After restarting the camera you will be able to choose the
functions in your local language.