Olympus FE-120 - Manual (Page 14)

14
En
1 Press bY.
• The self-timer settings screen is displayed.
2 Select [ON], and press Z.
3 Press the shutter button fully to take the
picture.
• The self-timer lamp lights for approximately 10
seconds after the shutter button is pressed, then starts blinking. After
blinking for approximately 2 seconds, the picture is taken.
1 Press d#.
• The flash mode setting screen is displayed.
2 Press a/c to select the flash mode, and press Z.
3 Press the shutter button halfway.
• When the flash is set to fire, the
#
mark lights steadily.
4 Press the shutter button fully to take the picture.
Flash working range:
W (max.) : Approx. 0.2 m to 3.7 m (0.7 ft. to 12.1 ft.)
T (max.) : Approx. 0.6 m to 2.1 m (2.0 ft. to 6.9 ft.)
Self timer
Flash modes
Icon Flash mode Description
No
indication
Auto flash The flash fires automatically in low light
or backlight conditions.
!
Red-eye-reduction
flash The red-eye reduction flash mode
significantly reduces this phenomenon by
emitting pre-flashes before firing the
regular flash.
#
Fill-in flash The flash fires regardless of the available
light.
$
Flash off The flash does not fire even in low light
conditions.
Self-timer lamp
d4271_basic_e.fm Page 14 Monday, July 4, 2005 10:33 PM