Olympus XZ-10 - Manual (Page 65)

65 EN
Connecting the camera to a computer
6
Copying pictures to a computer without
OLYMPUS Viewer 3
Your camera supports the USB Mass Storage Class. You can transfer images to a
computer by connecting the camera to the computer with the provided USB cable. The
following operating systems are compatible with the USB connection:
Windows
Windows XP Home Edition / Windows XP Professional /
Windows Vista / Windows 7 / Windows 8
Macintosh Mac OS X version 10.3 or later
1
Turn the camera off and connect it to the computer.
• The location of the USB port varies with the computer. For details, refer to your
computer’s manual.
2
Turn on the camera.
• The selection screen for the USB connection is
displayed.
3
Press FG to select [Storage]. Press Q.
USB
Easy Print
MTP
Storage
Charge
Set
Custom Print
4
The computer recognizes the camera as a new device.
# Cautions
• If your computer is running Windows Vista/Windows 7/Windows 8, select [MTP] in Step 3
to use Windows Photo Gallery.
• Data transfer is not guaranteed in the following environments, even if your computer is
equipped with a USB port.
Computers with a USB port added by means of an extension card, etc.
Computers without a factory-installed OS and home-built computers
• Camera controls can not be used while the camera is connected to a computer.
• If the dialog shown in Step 2 is not displayed when the camera is connected, select [Auto]
for [USB Mode] (P. 51) in the camera custom menus.