Olympus IR-500 - Manual (Page 25)

25
If a problem arises
Ot
he
rs
Remote control
Possible cause Corrective action Ref. page
( The camera cannot be turned on with the remote control.
The AC adapter is not connected. Connect the AC adapter to the cradle. 22
The multi-swing display is closed. Set the camera on the cradle with the
multi-swing display raised.
21
( The remote control buttons do not function.
The control frequency of the remote
control does not match that of the
camera.
Match the control frequency. For
details, refer to the instruction manual of
the remote control.
—
The camera is not set on the cradle in the
correct direction.
Set the camera on the cradle with the
multi-swing display raised and the
remote control window facing forwards.
21
You are very far from the camera and
the remote control signal does not reach.
Come closer to the camera and try again.
—
The battery of the remote control is
going low.
Replace the battery with a new one. For
details, refer to the instruction manual of
the remote control.
—
00E up date Adam .book Page 25 Thursday, March 24, 2005 1:57 AM