Erasing pictures, Single-frame erase, P.61 – Olympus D-380 User Manual
Page 62: Ds. “single-frame erase, P.61)
61
P
lay
b
a
ck
Erasing pictures
Recorded pictures can also be erased. This can be done either one frame or
all the pictures stored in the internal memory or on the card at a time.
Single-frame erase
1
Press
with the lens barrier closed.
The monitor turns on.
2
Press
to select the picture you want to erase.
“Playing back still pictures” (
p.54)
3
Press .
The top menu is displayed.
4
Press
to select
ERASE.
5
Press
to select YES, then
press .
The picture is erased and the menu is
closed.
• Erasure is not possible if the picture you want to erase is protected or
a write-protect seal is attached to the card. Before erasing, unprotect
the picture or remove the write-protect seal from the card.
• Once erased, pictures cannot be restored. Check each picture before
erasing to avoid accidentally erasing pictures you want to keep.
“Protecting pictures (Protect)” (
MODE MENU
INFO
ERASE
YES
NO
SELECt
GO
ERASE