Olympus D-380 - Manual (Page 42)

Varying the image brightness (Exposure compensation)
41
Advanc
ed s
hoot
ing
5
Press to select the exposure
compensation value.
Select a [+] value to brighten the image or
a [-] value to darken the image.
The exposure compensation value is set.
To close the menu, press
twice.
6
Take the picture.
• The exposure compensation value returns to ±0 (factory default
setting) when the lens barrier is closed. “Saving the settings (All
Reset)” (
p.78)
• When you adjust the exposure while observing the subject on the
monitor, the brightness of the image displayed also changes.
However, the variation may be less noticeable when the subject is
dark. In this case, play back the recorded picture to confirm that the
exposure is satisfactory.
• If the flash is used, the image brightness (exposure) may differ from
the intended brightness (exposure).
• Exposure compensation cannot correct the image if the surroundings
of the subject are extremely bright or dark.
CARD
SEt
PIC
CAMERA MEtERING
+ 1.5