Olympus EVOLT E-510 - Manual (Page 84)

84
EN
Customizing the settings/f
unctions of your camera
5
TV video signal types in major countries and regions
Check the video signal type before connecting the camera to your TV.
Button timer
When functions are set with the direct buttons, this function allows you to set the duration
from when you stop operating the buttons to when the menu disappears.
MENU[Z][BUTTON TIMER]
[HOLD] You can take as long as you like to complete function setting. The
current screen will remain until you press the button again.
[3SEC]/[5SEC]/[8SEC] You can change the setting during the number of seconds
indicated.
Auto power off
You can set the camera to turn off automatically if not operated for a long time. It will not turn
off if this is set to [OFF].
MENU[Z][4 h TIMER]
[OFF]/[4 h]
n (arrow pad) lock
To prevent any unwanted operations, you can lock the arrow pad so that the functions
assigned to the arrow pad buttons are not activated when pressed.
g “Setting functions
using direct buttons” (P. 20)
MENU[Y][n LOCK]
[OFF]/[ON]
A
You can switch the functions of the AEL/AFL button and the < button. When you select
[ON], the AEL/AFL button will function as the < button, and the < button will function as
the AEL/AFL button.
MENU[Z][A]
[OFF]/[ON]
Firmware
Your product’s firmware version will be displayed.
When you make inquiries about your camera or accessories or when you want to download
software, you will need to state which version of each of the products you are using.
MENU[Z][FIRMWARE]
Press d. Your product’s firmware version will be displayed. Press the i button to return
to the previous screen.
NTSC North America, Japan, Taiwan, Korea
PAL European countries, China
s0010_e_00_unified.book Page 84 Thursday, April 19, 2007 10:40 AM